Synergy Ceramic Coating
Finally, the wait is over! Infinity Wax brings you our first ever ceramic coating, Synergy.
Synergy 1 year coating is an inorganic nano-resin ceramic coating. Capable of withstanding a wide range of PH detergents from 2-12, temperatures up to 600 celsius with additional wear resistance to the coated surface. Synergy also displays strong oleophobic properties. A single layer of Synergy 1 will provide 1+ years of protection with a coating thickness of 0.2-0.5 μm per application. Synergy can be layered within the first hour of application only. Synergy has been designed specifically for use in Northern Hemisphere climates with relative humidity from 40-80%. Synergy 1 covalently bonds to the vehicle panels and uses an advanced Sol-gel hydrolysis reaction which allows the product to solidify quicker and harder without force curing making it ideal for DIY installation. Primary curing is within 1 hour, fully cured in 8-72 hours. An additional reactive polymerisation within the product allows for safe storage outdoors and protects from harsh elements whilst also providing an instant hydrophobic layer allowing the cross-linking to complete over a period of 8-72 hours without negative environmental impacts, this is almost a safety net which gives a near guarantee on product adhesion even at DIY level. Synergy 1 has passed ISO 17132 T-bend testing (22°) and ISO 2409 cross cut (single blade) with class 0 results.
1. Preparation, we recommend abrasive decontamination by way if machine polishing. This will not only remove previous waxes or sealants from the paintwork but also remove or reduce paintwork defects. In an ideal world, you should always seek to remove as many paint defects prior to coating.
2. Remove polish residue, we recommend an alcohol-based panel wipe like isopropanol.
3. Using your applicator choice, start by turning the bottle upside down and applying a few drops to the application pad surface in a straight line. Around 15-20 drops will be perfect the first time the applicator is used. Apply coating to the vehicle surface in a crosshatch fashion, another option on larger panels is to make a plus formation with coating on the surface. This creates 4 smaller work areas, then work each area left to right then up and down to create an even layer. Apply to only 1 panel at a time and remove the residue within a maximum of 5 minutes.
4. Remove coating using our blue short pile cloth or similar. Remove in straight lines taking care not to miss any areas. Missed areas, if not rectified will harden and could need machine polishing to remove at a later date. After use, this towel should not be used again on another vehicle for coating removal!
5. Finishing the coating application is done by using our yellow final wipe down towel or similar, always ensure your towels are new or clean prior to use. Wipe over all panels which have been coated, this will remove and residual light residue from the coating and provide a crisp finish.
All Orders are dispatched Sams Working Day.